Take your time and work around the tubing. Get the Fix Kit for this repairhttps://www. You're trying to heat the tubing, not burn it, so keep the flame well away. Today, iFixit is going to show you how to take apart your iPhone 7 and replace the lightning connector yourself. Cleaning it out stopped the wiggling of the cord and allows for a direct charge. I thought for sure the charger port was loose. I was on the verge of getting a new phone based on this issue alone and chalked it up to obsolescence. And, because you're working with fire, be sensible. The answer of cleaning the port out with a toothpick worked perfectly. With the tubing held over the strain relief of the cable, gently apply the heat (if you've not done this before you might want to experiment on something that isn't your Lightning cable).Slip the tubing over the Lightning connector.Cut the tubing down to around 50mm (no need to be super-precise, this isn't rocket surgery).Also sometimes your charge port can have some debris in it. If the contacts are gone, its sadly time for a new cable. ![]() If the gold contacts are still present on the cable, you can use some high concentration (I use 99) ISO alcohol to clean them. A heat source such as a butane torch or a heat gun. Over time lightning cables can lose their effectiveness if the contacts are dirty/worn off.Something to cut the tubing down to size (scissors will do, but here I'm using my awesome Neji-Saurus screw extracting pliers because I had them handy).Preferably get the stuff that is lined with adhesive because that does a better job. You can pick up heat-shrink tubing stuff from eBay or from an auto parts store. For now, the Vision Pros fat Lightning cable remains a mystery. Heat-shrink tubing with a diameter of 6 to 6.4mm (any bigger and it won't work) and it needs to be rated at a 3 to 1 shrink ratio ( this is the stuff I use).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |